How to Make Your Own Molds with Hiflex DIY Putty

Pubblicato il da

How to Make Your Own Molds with Hiflex DIY Putty

 Making a Mold

 1. Measure and mix equal amounts:

Mix equal amounts of the different-colored putties together until they're a uniform (not marbled) color. If you're using Hiflex DIY Putty, don't stress too much about getting precisely the same amount of each color. Just roll out balls of putty that look roughly the same size.

 2. Roll into Ball:

Roll the putty mixture between your hands to eliminate creases. In my experience, applying pressure to really compress the putty ball helps here, especially if you're nearing the end of the putty's workable time.

 3. Mold and Set:

Shape the putty over whatever you're molding, pressing down completely to get a good impression. If it works better for the item you're molding, you can also put the mold putty on wax paper (it sticks to regular paper!) and press the item into it. If you're molding something large and flat (like for texture sheets), you can even run your mold putty through the pasta machine first to get a thin sheet. If you find you've mixed up more putty than you need for your item, quickly roll the excess into a ball and find something else to mold. And you do have to work fairly quickly: depending on conditions, 5 minutes is about as much good molding time as you'll have.

After you're done molding, let it sit undisturbed, according to the package directions (Hiflex DIY Putty sets in 25-35 minutes).

 4. Tweak and Use your Mold:

Once it's set, your mold is ready to use as is -- or you can tweak it some more. The mold putty will stick to itself, so if you happened to get a thin spot in your mold, you can patch it with more putty and allow it to set again. You can also cut the mold with scissors or a craft knife -- which is really handy for cleaning up edges on texture sheet molds. To use the mold, roll your polymer clay into a ball, eliminating all creases. Press it into the mold, then use an aluminum scraper to trim off any extra clay, leaving the back of the clay even with the top of the mold. (You can also use a clay knife to do this, but be careful not to cut the mold!) Gently press the clay out of the mold, then make any necessary modifications before baking. If you have a thin, flat mold, you can use a brayer to press it into a clay sheet -- or you can even run the mold and clay sheet through the pasta machine together.

 Ideas for Molds

You can make molds of anything.

Here's a few ideas to get you started:

 Jar of Buttons:

Want to make handmade polymer clay buttons to match some wonderful fabric? (Or to replace a missing button?) A button mold is a great way to keep all your buttons the same size and shape. Button molds are also a fun way to practice your molding skills -- grab that big jar o' buttons and start playing.


Make your own texture plates by finding interesting textures and making molds from them. Try baskets, lace, leaves -- or anything else that's got a great texture. You could also use extruded clay to make interesting patterns on a sheet of clay, then create a texture sheet from that.

 Handmade Items:

Once you get the hang of making your own molds, you'll really appreciate what a wonderful tool molds can be. Did you create one earring & want to make sure the other matches it perfectly? Make a mold! Want to mass-produce a favorite handmade polymer clay creation? Molds are a great way to speed up the process.

Commenti: 0
Altre informazioni: Hiflex DIY Putty, higflex DIY usage instructions

Soltanto i clienti registrati possono pubblicare commenti.
Accedi e pubblica commento Registrati ora