CharmFlex Light LV, Addition-reaktion Silikoner, Vinylpolysiloxan, Type 3, Låg viskositet, 2 x 50mL


Ny

CharmFlex Light LV, Addition-reaktion Silikoner, Vinylpolysiloxan, Type 3, Låg viskositet, 2 x 50mL

Produktnr: DK10303

Tillgänglig
kan skickas inom 24 timmar

RRP £24,58
£16,61 / låda/or
Besparing 32 %

Pris utan moms



 CharmFlex® Light LV, 2x50mL   (DK10303)    

 CharmFlex Light LV

Hydrophilic Vinyl Polysiloxane Impression Materials

 CharmFlex® Light series are hydrophilic vinyl polysiloxane impression material type of Light LV, Regular and Light-Hard. It is used for the one-step or two-step impression taking of whole teeth or individual tooth in the mouth.

 Cautions:

  • It must be handled by dentists and dental specialists according to the instructions before using it
  • Recommend the Rubber dam to reduce side effects of using for patients who have a history of severe allergic reaction to this material
  • Do not use to patients who have a skin rash, dermatitis or histories of hypersensitivity
  • Stop applying this material to the patients who have a rash or hypersensitive symptoms during using
  • This material is used only to the oral tissue. Avoid contact with eyes
  • If accidental contact occurs with eyes or skin, wash immediately with much water and seek medical advice
  • Non-specialists must not use this material. Do not use this material for other purposes
  • A protective device for the respiratory tract is highly recommended before a surgical operation
  • Do not use after the expiration date (within 2 years)

 Application Range:

  • Impression taking of Whole teeth / Individual tooth / All
  • Impression taking of Crown, Bridge, Inlay, Onlay / All
  • Impression taking of Mono-phase, Partial & Full Denture / Regular
  • Impression taking of Implant / Light-Hard

 Application Method:

1. Before the Application

  • Check the expiration date and avoid package contamination
  • Follow the instructions for use before using it
  • Place a disposable mixing tip on cartridge, and place the cartridge on the dispenser

2. Application

  • Apply the materials onto the tray of putty (2-step) / Heavy Body (1-step) depending on techniques being used
  • Set the tray in the mouth, keep the material until it is perfectly set in mouth
  • After impression material is perfectly set, store it in room for 30 minutes

 Storage:

  • Waste the disposable mixing tips after use it
  • Store this material in a shady, cool and dry place (18~24°C/64~75°F)
  1. Model name: Light LV
  2. Working time: 1'30''
  3. Setting time in the mouth: 4'30''
  4. Hardness (Shore A) : 47
  1. Model name: Regular
  2. Working time: 1'30''
  3. Setting time in the mouth: 4'30''
  4. Hardness (Shore A) : 65
  1. Model name: Light-Hard
  2. Working time: 1'30''
  3. Setting time in the mouth: 4'30''
  4. Hardness (Shore A) : 55

 Packaging:

  • 2 x 50mL Auto Mixing Cartridges, Base & Catalyst 
  • Instruction manual
  • 6 x Mixing Tips, Yellow

Kunder som köpte denna produkt köpte också

Mixpac Automix Blandningspistol, 1:1 & 2:1
£16,61 / förpackning(ar) *
*

Pris utan moms


Utforska även dessa kategorier: Kategorier, Impression_Materials, Addition_Silicones